Osmo Garden Stain

Osmo Garden Stain Avis

La note en étoile d'un produit correspond à la moyenne de tous ses avis.


Logo de Next Day Paint

Vendu par Next Day Paint

www.nextdaypaint.co.uk

•

19,7 k Avis

4,7

Les informations sur cette page sont basées uniquement sur les avis produits écrits par des clients de Next Day Paint via Trustpilot.


Ce que les clients ont mis en évidence

Qualité

5,0

1 évaluation

Rapport qualité / prix

5,0

1 évaluation


Détails du produit

Overview Enhance and protect your garden timber with Osmo Garden Stain, a transparent, satin wood finish available in a range of colours. Ideal for fences, furniture, and play equipment, it offers outstanding weather and UV resistance with a microporous finish that won’t crack, peel or flake. Easy to apply by brush or sprayer, it’s water repellent, low in solvents, and safe for people, pets and plants once dry. No sanding needed when topping up. Long-lasting, satin colour finish Weather, water & UV resistant Breathable and flake-free Sprayable and low solvent Safe for children’s toys (EN 71.3) Area Exterior Recommended Use Perfect for every exterior wood (except for decking): timber cladding, balconies, window shutters, fencing, pergolas, sheds, garden furniture, carports. Coverage Up to 16m2 per litre Drying Time 3-4 Hours Re-Coat Time 3-4 Hours Recommended Coats 2 Coats Application Method Brush, Roller Preparation Wood surface must be clean, dry and frost-free (out- side temperature min. +5 °C, moisture content max. 20%). If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat 4001. Osmo Garden Stain is ready to use. Do not thin. Stir well. If possible, please apply first coat to all sides before installation. Clean and sand existing intact finishes – remove any damaged finishes (sand away). Always wear a dust mask while sanding. The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Application With Osmo Flat Brush, Microfibre Roller or Oil Finish Applicator Fleece, apply thinly and quickly lap for lap along the grain or in a spray application. Leave to dry for 3-4 hours under good ventilation. After drying, fine sanding between coats as needed. Apply the second coat also thinly and evenly. If possible, apply the first coat to all sides prior to installation. For renovations, one coat is usually sufficient.
  • Marque : Osmo
  • GTIN: 4006850281176

Tous les avis


Noté 5 sur 5 étoiles

Its a bit of a cliche BUT it literally does do what it says on the tin

Qualité: 5
Rapport qualité / prix: 5