HMG Thinner 2621 Avis

HMG Thinner 2621 is a thinner for use in various applications. Click To Jump To Section: Features & Benefits Product Specification Surface Preparation Product Notes Health & Safety Features & Benefits For use with compatible HMG systems. Suitable for use with the following HMG products: HMG AR141 Matt Black HMG Chlorinated Rubber HMG Hammer Finishes QAD HMG QAD Enamel HMG HB05 Primer HMG HB48 Primer HMG High Build Vinyl Primer Finish HMG SPS Primer Finish Gloss HMG SPS30 Primer Finish HMG SPS70 Primer Finish Product Specification Technical Data HMG Thinner 2621 Volume Solids: 0.0% VOC Content: 0.780kgs/ltr SG: - Viscosity: Not determined Density: 0.868 g/cm³ Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed. Shelf Life: 12 months from delivery date in original sealed containers. Flash Point: 24°C Surface Preparation Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. Read and follow the safety data sheet, product data sheet and label instructions. Stir all paints thoroughly before use. Always use the same batch number on the same job. Check colour & sheen. Filter the product immediately before use. Reduce emissions and maintain quality by replacing tin lid after use. Product Notes Information On Basic Physical And Chemical Properties HMG Thinner 2621 Form: According to product specification Colour: According to product specification Odour: Characteristic Odour Threshold: Not determined pH-value 20°C: Not determined Melting point/freezing point: -95°C Initial boiling point and boiling range: 137°C Flash Point: 24°C Flammability (solid, gas): Not applicable Ignition temperature: 430°C Decomposition temperature: Not determined. Auto-ignition temperature: Product is not selfigniting. Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible." Explosion limits: Lower: 1 Vol % Explosion limits: Upper: 7.8 Vol % Vapour pressure at 20°C: 9.5 hPa Density at 20°C: 0.868 g/cm³ Relative density: Not determined Vapour density: Not determined Evaporation rate: Not determined Solubility in / Miscibility with water: NOT MISCIBLE Partition coefficient: n-octanol/water: Not determined Viscosity: Dynamic at 20°C: Not determined Viscosity: Kinematic: Not determined Solvent content: Organic solvents: 100.0% Solids content: 0.0% Health & Safety Refer to the safety data sheet in the attachments section above and tin label prior to use. Click to go back to the top of the page